THERMOPLASTIC ELASTOMERS North America Portfolio PRODUCT SELECTION GUIDE GENERAL PROPERTIES REGULATORY OVERMOLDING PROCESS FEATURES Appearance Hardness Specific Gravity Food Contact UL 94 Suitable Substrates Injection Extrusion ASTM (Shore) ASTM (D792) reSound™ REC Recycled Content Series VX2800-9003 C Natural 47A 0.94 - - PP ✔ - 25% post-consumer recycled (PCR) content (PVB from windshields and laminated glass); 1.77 cradle-to-gate product carbon footprint (PCF) VX2800-9004 C Natural 54A 0.95 - - PP ✔ - 25% PCR content (PVB from windshields and laminated glass) VX2800-0001 I Black 65A 0.89 - - PP ✔ - 25% post-industrial recycled (PIR) content VX2800-0001 I Natural 65A 0.89 - - PP ✔ - 25% PIR content VX2800-0001 C Black 65A 0.89 - - PP ✔ - 25% PCR content (ocean plastics) VX2800-0002 I Black 65A 0.88 - - PP ✔ - 40% PIR content VX2800-0003 C Gray 65A 0.88 ✔ - PP ✔ - 25% PCR/PIR content (food packaging) with application specific FDA rating VX0100-0001 AR I Black 79A 1.05 - - PC, ABS, PC/ABS ✔ - 30% PIR content reSound™ BIO Bio-based Series RS7900-0001 30N Natural 31A 1.00 - - PP ✔ - 35% bio-derived content (Gen 1 biomass) RS7900-0001 45N Natural 48A 1.11 - - PP ✔ - 35% bio-derived content (Gen 1 biomass) RS7900-0001 60N Natural 59A 1.11 - - PP ✔ - 35% bio-derived content (Gen 1 biomass) RS7900-0001 70N Natural 69A 1.09 - - PP ✔ - 35% bio-derived content (Gen 1 biomass) RS2800-0001 30N Natural 33A 0.85 - - PP ✔ - 50–60% bio-derived content (Gen 1 biomass) RS2800-0001 45N Natural 49A 0.85 - - PP ✔ - 50–60% bio-derived content (Gen 1 biomass) RS2800-0001 60N Natural 63A 0.87 - - PP ✔ - 50–60% bio-derived content (Gen 1 biomass) RS2800-0001 70N Natural 71A 0.86 - - PP ✔ - 50–60% bio-derived content (Gen 1 biomass) reSound™ Ultra-Low Carbon Footprint Series RS0200-9001 80 Natural 80A 0.87 - - PP, LDPE ✔ - -0.40 cradle-to-gate PCF RS0200-9001 60 Natural 60A 0.86 - - PP, LDPE ✔ - -0.03 cradle-to-gate PCF FEATURED TPES FOR CONSUMER APPLICATIONS CO N SU M ER Avient’s specialty thermoplastic elastomers (TPEs) are formulated to meet countless performance, application and aesthetic demands. FEATURED TPES FOR CONSUMER APPLICATIONS CO N SU M ER GENERAL PROPERTIES REGULATORY OVERMOLDING PROCESS FEATURES Appearance Hardness Specific Gravity Food Contact UL 94 Suitable Substrates Injection Extrusion ASTM Shore ASTM (D792) Consumer Electronics Series Versaflex™ CE 3120-40 Natural 42A 0.92 - - PC, ABS, PC/ABS, COPE ✔ - Good compression set—ideal for device cases or electronic grips Versaflex™ CE 3120-65 Natural 66A 1.15 - HB PC, ABS, PC/ABS, COPE ✔ - Chemical and abrasion resistant; 4.69 cradle-to-gate PCF—ideal for device cases or electronic grips Versaflex™ CE 3140-65N Natural 65A 1.00 - - PC, ABS, PC/ABS, COPE ✔ - 5G transparent materials—ideal for device cases or gaskets Versaflex™ CE 3140-90N Natural 90A 1.01 - - PC, ABS, PC/ABS, COPE ✔ - 5G transparent materials—ideal for device cases or gaskets Versaflex™ CE 3620 Black/ Natural 65A 1.00 - HB PC, ABS, PC/ABS, COPE ✔ - Chemical and abrasion resistant, hydrolitically stable—ideal for electronic grips/gaskets or wearables Engineering Resin Overmolds Versaflex™ OM 1060X-1 Natural 60A 0.93 ✔ - PC, ABS, PC/ABS ✔ - Versatile OM resin—ideal for grips/gaskets Versaflex™ OM 9-801N Natural 47A 1.04 ✔ HB PC, ABS, PC/ABS, PPO, POM, COPE, PMMA, HIPS ✔ - Soft touch/rubber feel—ideal for grips/gaskets Versaflex™ OM 9-802CL Clear 40A 0.92 ✔ - PC, ABS, PC/ABS, COPE ✔ - Soft touch/rubber feel—ideal for grips/gaskets Versaflex™ OM 6059-9 Black 58A 1.10 - HB PA 6 and 6,6 ✔ - Superior adhesion—ideal for grips, power tools/equipment Versaflex™ OM 6160-1 Black/ Natural 60A 1.11 ✔ HB PA 6 and 6,6 ✔ Superior adhesion—ideal for grips, power tools/equipment Versaflex™ OM 6240-1 Natural 43A 1.09 - - PA 6 and 6,6 ✔ - Superior adhesion — ideal for grips, power tools/equipment Versaflex™ OM 6258-1 Natural 62A 1.09 - - PA 6 and 6,6 ✔ - Superior adhesion—ideal for grips, power tools/equipment Versaflex™ OM 6258-9 Black 62A 1.09 - HB PA 6 and 6,6 ✔ - Superior adhesion—ideal for grips, power tools/equipment Versaflex™ OM 6275-9 Black 75A 1.10 - - PA 6 and 6,6 ✔ - Superior adhesion—ideal for grips, power tools/equipment Versollan™ OM1255NX Black 59A 1.05 - HB PC, ABS, PC/ABS, PC/PBT, COPE ✔ - Superior adhesion—ideal for power tool grips Versollan™ RU 2205-1 Natural 65A 1.16 - HB PC, ABS, PC/ABS, COPE ✔ ✔ High performance, rubber feel GENERAL PROPERTIES REGULATORY OVERMOLDING PROCESS FEATURES Appearance Hardness Specific Gravity Food Contact UL 94 Suitable Substrates Injection Extrusion ASTM Shore ASTM (D792) Special Series Versaflex™ VDT 4202-40B Black 40A 1.00 - - PP ✔ ✔ Vibration dispersion—ideal for washer/dryer feet or shin guards Versaflex™ G2800-17 Pink 18 OO 0.85 - - - ✔ - Skin-like feel—ideal for adult toys Versaflex™ SP 2820-55N Natural 55A 0.91 ✔ - - ✔ ✔ Superior puncture and tear resistance—ideal for dog toys Versaflex™ XP 2850 Natural 55A 0.88 ✔ - - ✔ ✔ Wet grip—ideal for water sports or grips Versaflex™ GP 2810-40N AM US Translucent 45A 0.87 ✔ - - ✔ - Antimicrobial Versaflex™ CE 3120-65 AM Natural 67A 1.15 - - PC, ABS, PC/ABS, COPE ✔ - Antimicrobial for consumer electronics Versalloy™ XL 9045-1 Natural 44A 0.88 ✔ - - ✔ - Excellent flow for long, thin flow paths— ideal for grips or thin wall parts Versalloy™ XL 9055-1 Natural 53A 0.89 ✔ - PP ✔ - Excellent flow for long, thin flow paths— ideal for grips or thin wall parts Versalloy™ XL 9055X-9 Black 53A 0.89 ✔ HB PP ✔ - Excellent flow for long, thin flow paths— ideal for grips or thin wall parts Versalloy™ XL 9070-1 Natural 70A 0.89 ✔ - PP ✔ - Excellent flow for long, thin flow paths— ideal for grips or thin wall parts Versalloy™ XL 9070X-9 Black 70A 0.89 ✔ HB PP ✔ - Excellent flow for long, thin flow paths; 2.54 cradle-to-gate PCF—ideal for grips or thin wall parts Dynaflex™ G7702-9001-02 Black 37A 1.10 - - PP ✔ ✔ High temperature performance—ideal for seals and gaskets Dynalloy™ DT 7910W White 45A 0.93 ✔ - - ✔ ✔ Low compression—ideal for dairy tubing Versaflex™ CL 2000X Clear 3A 0.87 ✔ - - ✔ ✔ Ultra soft Versaflex™ CL 2003X Clear 33 OO 0.87 ✔ - - ✔ ✔ Gel feel Versaflex™ CL30 Clear 30A 0.89 ✔ - PP ✔ ✔ High clarity, high tackiness Versaflex™ CL40 Clear 43A 0.89 ✔ HB - ✔ ✔ High clarity, high tackiness General Purpose Series Versaflex™ GP 2810 Translucent 20A–60A 0.88 ✔ - - ✔ ✔ Unfilled Versaflex™ GP 2810 Translucent 70A–90A 0.89 ✔ HB - ✔ ✔ Unfilled Dynaflex™ G7920 Natural/Black 20A 1.01 ✔ - PP ✔ ✔ Filled Dynaflex™ G7900 Natural/Black 30A–90A 1.05–1.20 ✔ HB PP ✔ ✔ Filled FEATURED TPES FOR CONSUMER APPLICATIONS CO N SU M ER GENERAL PROPERTIES REGULATORY OVERMOLDING PROCESS FEATURES Appearance Hardness Specific Gravity Compression Set @ 23°C Compression Set @ 100°C Food Contact ISO 10993 USP VI UL 94 Suitable Substrates Injection Extrusion ASTM Shore A ASTM (D792) ASTM % ASTM % Tubing Versaflex™ G2705 N Translucent 60 0.89 20 - ✔ ✔ ✔ ✔ PP ✔ ✔ High resiliance, low compression set, and good puncture sealing–ideal for medical and biopharma tubing Versaflex™ HC BT218 Translucent 67 0.89 19 69 - ✔ ✔ ✔ - - ✔ Weldable and kink resistant—ideal for biopharma tubing Versalfex™ HC BIO BT218 Translucent 70 0.88 18 58 - ✔ ✔ - - - ✔ Weldable and kink resistant; 40% bio-derived content (Gen 1 biomass)—ideal for biopharma tubing Versaflex™ HC MT317 Translucent 68 0.89 17 69 - ✔ ✔ ✔ - - ✔ Flexible and kink resistant, high service temperature —ideal for medical and biopharma tubing Versalloy™ HC 9220-70 Natural 70 0.95 17 51 - ✔ ✔ - PP ✔ ✔ High temperature resistance—ideal for peristaltic pump tubing Syringe Components Versaflex™ HC 2110-35N Natural 35 0.89 19 47 - ✔ ✔ - LDPE, PP ✔ - Good puncture sealing and elevated temperature performance—ideal for septums Versaflex™ HC 2110-57B Black 57 1.01 20 37 - ✔ ✔ - - ✔ - Low coefficient of friction and elevated temperature performance—ideal for plungers and stoppers Engineering Resin Overmolds Versaflex™ OM 1040X-1 Translucent 42 0.92 22 - ✔ ✔ ✔ - PC, ABS, PC/ABS ✔ - Good compression set at room temperature— ideal for seals and grips Versaflex™ OM 3060-1 Clear 59 0.90 33 - ✔ ✔ ✔ HB PC, ABS, PC/ABS, PC/PETG, PC/PBT ✔ - Good compression set at room temperature and UV stability—ideal for seals and grips Versaflex™ OM 8940X-1 Clear 40 0.92 20 - ✔ ✔ - - PK, COPE, PC, ABS, PC/ABS ✔ - Excellent chemical resistance to alcohols and disenfectants—ideal for grips on medical devices Versaflex™ OM 4052 Translucent 56 1.01 27 - ✔ - - - PC, ABS, PC/ABS ✔ - Excellent chemical resistance to skin oils, like sebum, and hand lotion—ideal for consumer healthcare applications Versaflex™ OM 4063 Translucent 64 1.12 30 - ✔ - - PC, ABS, PC/ABS ✔ - Excellent chemical resistance to skin oils, like sebum, and hand lotion—ideal for consumer healthcare applications General Purpose Applications Versaflex™ CL E85 Clear 85 0.90 20 72 ✔ ✔ ✔ - - - ✔ High clarity without plasticizers—ideal for extrusion Versaflex™ HC 3810 Series Translucent 20–90 0.88 16 54 - ✔ - - - ✔ - Formulated without animal derivatives, excellent colorability—ideal for seals and labware Versaflex™ G2705 N Translucent 60 0.89 20 - ✔ ✔ ✔ - PP ✔ ✔ High resiliance, low compression set, and good puncture sealing Versalloy™ HC 9220-70 Natural 70 0.95 17 51 - ✔ - - PP ✔ ✔ High temperature resistance Versalloy™ HC 9210 Series Natural 55 & 70 0.89 20 44 - - ✔ - - ✔ - Formulated without animal derivatives— ideal for injection molding long thin flow paths, smooth surface aesthetics Versaflex™ CL2242 Clear 43 0.89 23 - ✔ ✔ ✔ - - ✔ - High clarity maintained after boiling cleaning processes Versaflex™ CL2250 Clear 50 0.89 20 - ✔ ✔ ✔ - - ✔ - High clarity maintained after boiling cleaning processes FEATURED TPES FOR HEALTHCARE APPLICATIONS H EALTH CAR E GENERAL PROPERTIES REGULATORY BONDING PROCESS FEATURES Appearance Hardness Specific Gravity Weatherability* VOC FOG Odor** UL 94 Suitable Substrates Injection Extrusion ASTM Shore A ASTM (D792) Internal QUV 1000hrs (Delta E) VDA 278 μg/g (ppm) VDA 278 μg/g (ppm) Recycled Content Series reSound™ REC OF 7310-80 Black/ Natural (Gray) 80 0.90 0.35 75 379 3 (VDA 270) - PP ✔ 35% PCR/PIR content (food packaging)— ideal for automotive interior applications reSound™ REC OF 7310-90 Black/ Natural (Gray) 90 0.91 0.11 160 557 3 (VDA 270) - PP ✔ 45% PCR/PIR content (food packaging)— ideal for automotive interior applications General Purpose Series OnFlex™ G7705 B Black 42 1.20 - - - - - PP ✔ ✔ Easy processing for a wide variety of applications OnFlex™ G7705 N Natural 44 1.18 - - - - - PP ✔ ✔ Easy processing for a wide variety of applications OnFlex™ G7720 B Black 57 1.16 0.55 - - - HB PP ✔ ✔ Easy processing for a wide variety of applications OnFlex™ G7720 N Natural 55 1.17 3.72 - - - HB PP ✔ ✔ Easy processing for a wide variety of applications OnFlex™ G7820 N Natural 92 1.14 - - - - - PP ✔ ✔ Easy processing for a wide variety of applications Automotive Fasteners & Interior Components OnFlex™ AF 7210 Series Natural 40–90 1.00 - - - - - PP ✔ - Low odor and good UV resistance OnFlex™ AF 7210 Black 40 1.00 0.49 113 845 2 (SAE J1351, Dry) - PP ✔ - Low odor and good UV resistance OnFlex™ AF 7210 Black 50 1.00 0.42 51 762 2 (SAE J1351, Dry) - PP ✔ - Low odor and good UV resistance OnFlex™ AF 7210 Black 60 1.00 0.21 112 1740 1 (SAE J1351, Dry) - PP ✔ - Low odor and good UV resistance OnFlex™ AF 7210 Black 70 0.99 0.22 105 1976 3 (SAE J1351, Dry) - PP ✔ - Low odor and good UV resistance OnFlex™ AF 7210 Black 80 1.00 0.32 74 4459 3 (SAE J1351, Dry) - PP ✔ - Low odor and good UV resistance OnFlex™ AF 7210 Black 90 1.00 - - - - - PP ✔ - Low odor and good UV resistance HVAC & Interior Components OnFlex™ LO 7120-45N Natural 45 1.15 3.21 41 521 2 (SAE J1351, Dry) - PP ✔ - Significant reductions in VOCs and fogging compared to traditional TPE technologies GLS™ TPEs with Antimicrobial Technologies OnFlex™ LO 7120-45B AM Black 45 1.13 0.52 - - - - PP ✔ - Imbedded antimicrobial technology FEATURED TPES FOR TRANSPORTATION APPLICATIONS TRAN SPO RTATIO N * Values were taken on 3mm plaques following 1000hrs of continious exposure to UVA-340 ** Samples were conditioned at 23C at 35% RH for 24 hrs.

SPORTING GOODS Boots, bindings, protective equipment MARINE Hull reinforcement, seats, paddles 50% Long Glass Fiber Reinforced PP 50% Long Glass Fiber Reinforced PP + 0° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90°/90°/0° CFRTP 17K 28K 29K 50% Long Glass Fiber Reinforced PP + 0°/90°/0° CFRTP 29K 31K +60.7% FLEXURAL STRENGTH (ASTM D7264) IMPACT RESISTANCE (ASTM D3763) 50% Long Glass Fiber Reinforced PP 50% Long Glass Fiber Reinforced PP + 0° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90°/0° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90°/90°/0° CFRTP E n e rg y at T o ta l ( J) F o rc e a t P e ak ( kN ) 18 16 14 12 10 8 6 4 2 0 6.0 5.9 4.0 3.0 2.0 1.0 0.0 11.2 15.1 14.6 12.7 16.4 1.2 1.9 2.8 4.0 5.0 +58.3% +34.8% 50% Long Glass Fiber Reinforced PP 50% Long Glass Fiber Reinforced PP + 0° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90°/90°/0° CFRTP 17K 28K 29K 50% Long Glass Fiber Reinforced PP + 0°/90°/0° CFRTP 29K 31K +60.7% FLEXURAL STRENGTH (ASTM D7264) IMPACT RESISTANCE (ASTM D3763) 50% Long Glass Fiber Reinforced PP 50% Long Glass Fiber Reinforced PP + 0° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90°/0° CFRTP 50% Long Glass Fiber Reinforced PP + 0°/90°/90°/0° CFRTP E n e rg y at T o ta l ( J) F o rc e a t P e ak ( kN ) 18 16 14 12 10 8 6 4 2 0 6.0 5.9 4.0 3.0 2.0 1.0 0.0 11.2 15.1 14.6 12.7 16.4 1.2 1.9 2.8 4.0 5.0 +58.3% +34.8% Application design Modeling & simulation Prototyping & validation Material selection Composite/ resin compatibility Custom formulations Mold filling analysis Technical support Process optimization PROCESSING MATERIALS Material selection is crucial to an application’s success.

产品牌号 硬度 颜色 包覆成型 应用 密度 (g/cm3) Versaflex™ HC 2110-35N 34A 本色 PP/PE 0.89 注塑的自密封和胶盖 Versaflex™ HC 2110-57B 57A 黑色 PP 1.01 注射器胶塞 Versaflex™ HC MT224 75A 透明 PP 0.89 医疗管材 Versaflex™ HC BT218 67A 半透明 — 0.89 可焊接生物制药管材 Versaflex™ CL 2242 43A 透明 PP 0.89 包覆成型以满足人体工程学 包覆成型以满足 人体工程学 包覆成型以满足 人体工程学 包覆成型以满足 人体工程学 Versaflex™ CL 2250 50A 透明 PP 0.89 Versaflex™ OM 1040X 40A 本色/黑色 PC/ABS OM 0.92 Versaflex™ OM 3060 60A 透明 PC/ABS OM 0.90 医疗保健 TPE 埃万特是符合 USP VI， ISO 10993-4 和 10993-5 要求的高性能材料。 对于脂肪类食品和 酒精含量超过8%的食 品；条件D-G) EU 10/2011 GB 4806.6- 2016 Versaflex™ CL2242 43A 透明 PP/PC/ABS 0.89 FDA 177.1210 (所有食品；条件A–H) FDA 177.1210 (水性食品；条件A-H) FDA 177.2600 (水性食品；条件A-H) FDA 177.2600 (水性食品；条件A-H) FDA 177.2600 (水性食品；条件A-H) FDA 177.2600 (水性食品；条件A-H) N/A N/A Versaflex™ CL2250 50A 透明 PP/PC/ABS 0.89 N/A N/A Dynaflex™ G2780C 84A 半透明 PE 0.9 N/A N/A Versaflex™ FFC 2882-50 50A 半透明 PP 0.9 EU 10/2011 N/A Versaflex™ FFC 2882-70 70A 半透明 PP 0.88 EU 10/2011 GB 4806.6- 2016 Versaflex™ FFC 2882-87 87A 半透明 PP 0.88 EU 10/2011 GB 4806.6- 2016 Versaflex™ FFC 3882-70 70A 本色 PETG, ABS, PC 1.1 EU 10/2011 Versaflex™ OM 9100 系列 30–50A 半透明 PC/ABS 0.9 FDA 177.1210 N/A N/A 食品级 TPE 适合与食品接触的热塑性弹性体 不含双酚 A(BPA)，邻苯二甲酸盐或重 金属；符合 FDA， EU10 / 2011和中国 GB4806 的等级 耐磨性及抗撕裂，经过测试，可以安全 地用于微波炉和洗碗机 具有理想的包胶性能，不仅提供柔软的 表面触感，并可根据特定的舒适度要求 进行定制，包括减少振动和降低噪音 可注塑成型或直接在PP, ABS等基材上 包覆成型 无需二次加工，保证产品质量及稳定性 产品牌号 硬度 颜色 包覆成型 密度 (g/cm3) 合规 FDA EU GB Dynalloy™ FC 3510 系列 40–80A 本色 PETG, ABS, PC 1.04 FDA 177.1210 (水性食品；条件D-G) EU 10/2010 GB 4806.6- 2016 Dynalloy™ FC 7850 & 7860 系列 30–80A 半透明/本色 PP 0.88/0.99 通用 FDA FDA 177.1210 (水性食品但酒精含量 不超过8%；条件B-G 。 对于脂肪类食品和 酒精含量超过8%的食 品；条件D-G) EU 10/2011 GB 4806.6- 2016 Versaflex™ CL2242 43A 透明 PP/PC/ABS 0.89 FDA 177.1210 (所有食品；条件A–H) FDA 177.1210 (水性食品；条件A-H) FDA 177.2600 (水性食品；条件A-H) FDA 177.2600 (水性食品；条件A-H) FDA 177.2600 (水性食品；条件A-H) FDA 177.2600 (水性食品；条件A-H) N/A N/A Versaflex™ CL2250 50A 透明 PP/PC/ABS 0.89 N/A N/A Dynaflex™ G2780C 84A 半透明 PE 0.9 N/A N/A Versaflex™ FFC 2882-50 50A 半透明 PP 0.9 EU 10/2011 N/A Versaflex™ FFC 2882-70 70A 半透明 PP 0.88 EU 10/2011 GB 4806.6- 2016 Versaflex™ FFC 2882-87 87A 半透明 PP 0.88 EU 10/2011 GB 4806.6- 2016 Versaflex™ FFC 3882-70 70A 本色 PETG, ABS, PC 1.1 EU 10/2011 Versaflex™ OM 9100 系列 30–50A 半透明 PC/ABS 0.9 FDA 177.1210 N/A N/A 食品级 TPE 适合与食品接触的热塑性弹性体 不含双酚 A(BPA)，邻苯二甲酸盐或重 金属；符合 FDA， EU10 / 2011和中国 GB4806 的等级 耐磨性及抗撕裂，经过测试，可以安全 地用于微波炉和洗碗机 具有理想的包胶性能，不仅提供柔软的 表面触感，并可根据特定的舒适度要求 进行定制，包括减少振动和降低噪音 可注塑成型或直接在PP, ABS等基材上 包覆成型 无需二次加工，保证产品质量及稳定性 产品牌号 硬度 颜色 包覆成型 版权所有© 2024埃万特公司。

Initially available in overmolding grades compatible with PP, all grades are formulated to achieve comparable performance to traditional TPEs. RS7900-0001 30N RS7900-0001 45N RS7900-0001 60N RS7900-0001 70N Gen 1 Biomass Content (%) 35% 35% 35% 35% Hardness, Shore A 30A 45A 60A 70A Specific Gravity 1.0 1.1 1.1 1.1 50% Modulus, PSI 103 163 212 313 100% Modulus, PSI 127 192 247 355 Tensile Strength, PSI 564 759 920 1115 Elongation, % 699 692 712 727 Tear Strength, PLI 61 86 114 138 OM Substrate PP PP PP PP reSound™ BIO 7900 Series Copyright © 2023, Avient Corporation. This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner. 1.844.4AVIENT www.avient.com RS2800-0001 30N RS2800-0001 45N RS2800-0001 60N RS2800-0001 70N Gen 1 Biomass Content (%) 50–60% 50–60% 50–60% 50–60% Hardness, Shore A 30A 45A 60A 70A Specific Gravity 0.85 0.85 0.87 0.86 50% Modulus, PSI 111 167 256 378 100% Modulus, PSI 137 203 301 430 Tensile Strength, PSI 514 807 1089 1118 Elongation, % 672 735 709 644 Tear Strength, PLI 68 102 144 166 OM Substrate PP PP PP PP reSound™ BIO 2800 Series

NAME BASE RESIN(S) TARGET MARKETS AVAILABLE FEATURES1 Artisan™ Pre-Colored Thermoplastics PA Powersports, Lawn & Garden, Marine Customizable pre-color solutions Scratch & mar resistance Weatherability & UV resistance High impact resistance Chemical resistance Simplifies processing/replaces paint Tailored temperature performance range: -20°C to 105°C Global availability Complēt™ OnForce™ PA, PP, PPA, PPS, TPU Consumer, Transportation, Industrial Long fiber technology Elevated impact and mechanical properties at room temperature Increased performance at temperature extremes Excellent creep and fatigue resistance Glass and carbon fiber filled options Lubricated, fire retardant, and pre-colored options Edgetek™ Bergadur™ ABS, LCP, PA, PC, PC/ABS, PC/PBT, PC/PET, PC/PSU, PEEK, PES, PEI, POM, PPA, PPS, PSU Consumer, Transportation, Industrial Strength and durability Chemical resistance High impact resistance Weatherability Flame retardant grades: UL 94 V-0, V-1, V-2, and 5VA Pre-color solutions Lightweighting 5G properties - Dk/Df and 3D/LDS Gravi-Tech™ PA, TPU, TPE, PBT Consumer, Transportation, Industrial Customized density, from 1.5 to 11 gm/cm3 Broad modulus and strength: flexible to rigid Chemical and corrosion resistance Gravi-Tech™ LD light density grades available LubriOne™ PA, PBT, PC, PEEK, PEI, POM, PP, PPA, PPS, PS Transportation, Electrical & Electronics, Industrial Low coefficient of friction Self-lubricating Chemical, wear, and corrosion resistance Maxxam™ PP Consumer, Transportation, Electrical & Electronics, Industrial Homopolymer and copolymer grades Optional additives: UV, heat stabilizers Standard grades available in natural and black Maxxam™ FR PE, PP Consumer, Transportation, Electrical & Electronics, Industrial Flame retardant grades: UL 94 V-0, V-1, V-2, and 5VA Flame retardant masterbatches Elevated UL RTI ratings Halogen-free flame retardant grades available Nymax™ Nymax™ PIR Bergamid™ PA 6, 66, 612, 12, co-polymers Transportation, Building & Construction, Electrical & Electronics Toughened grades: medium and high impact Optional additives: heat stabilized, lubricated, impact modified, nucleated Standard grades available in natural and black Pre-colored solutions available PIR grades with 20%–100% recycled content, supporting the circular economy SPECIALTY ENGINEERED THERMOPLASTICS 1 See technical data sheets for complete product details 1 See technical data sheets for complete product details 2 From NEU™ Specialty Engineered Materials, LLC., a wholly-owned subsidiary of Avient Corporation NAME BASE RESIN(S) AVAILABLE FEATURES1 Trilliant™ ABS, LCP, PA, PC, ABS, PA 6, PA 66, PC/ABS, PC/PSU, PEBA, PEEK, PES, POM, PPA, PSU Certified to USP Class VI Formulations locked down Drug master file submissions by product stewardship Pre-colored, small lot production down to 50 lb–250 lb Sterilization, chemical resistance, and secondary process guidance Adherence to FDM-GMP manufacturing standards Antimicrobial technologies Materials for radiation shielding protection NEU™ Specialty Materials2 PEBA, TPU, PA 11, PA 12, PP, PE, TPE Radiopacifiers, stabilizers, and surface modifiers Antimicrobial technologies Pre-colored formulations Small lot capabilities Short lead times Versaflex™ HC TPE Overmolding Clear and heat resistant Ultra clear grades Ultra soft TPE gels, 30 shore OO FDA, USP Class VI, ISO 10993 approved grades Sterilizable under autoclave, radiation, and EtO gas Extrusion, injection, and blow moldable HEALTHCARE SPECIALTY THERMOPLASTICS NAME BASE RESIN(S) TARGET MARKETS AVAILABLE FEATURES1 reSound™ R Recycled Formulations PA6, PA66, PC Transportation, Consumer, Household Appliance, Electrical & Electronics, Industrial PA grades: Up to 100% recycled content PC grades: Up to 70% recycled content PIR and PCR grades available Support the circular economy Comparable performance to prime grades Customizable solution Surround™ ABS, PP, PBT, PC, PA 66 Transportation, Electrical & Electronics Integrated EMI/RFI shielding Long fiber technology Conductive properties Galvanic corrosion protection Lightweighting and ease of processing Stat-Tech™ ABS, PA, PC, PC/ABS, PC/PSU, PEEK, PEI, PES, PP, PPA Transportation, Electrical & Electronics Integrated EMI/RFI shielding Conductive properties Anti-static/dissipative properties Corrosion resistance Lightweighting and ease of processing Clean room materials for semiconductors available Therma-Tech™ LCP, PA, PEEK, PP, PPA, PPS Consumer, Transportation Thermally conductive Low coefficient of thermal expansion Corrosion resistance SPECIALTY ENGINEERED THERMOPLASTICS NAME BASE RESIN(S) TARGET MARKETS AVAILABLE FEATURES1 Barricade™ Elastomers with Fortrex™ Technology Barricade™ high-performance elastomers bring next genera- tion technology to market to bridge the gap between tradi- tional TPEs and silicone Healthcare, Industrial Aerospace, Appliances, Electronics High temperature compression set Processes on thermoplastic injection molding and extrusion equipment Customizable and colorable Process simplicity CROSSLINKABLE ELASTOMERS Barricade formulations leverage licensed Fortrex™ technology. Personal care products Lawn & garden tools Outdoor goods Office supplies Footwear Houseware durables PCR grade is formulated with recycled ocean plastics Supports the circular economy Can be overmolded to PP Comparable performance to traditional TPEs Versaflex™ Versaflex materials offer the benefits of overmolding and vibration damping to a wide range of end user applications such as medical tubing, protective film, electronics and many others. Consumer, Packaging, Healthcare, Electrical & Electronics, Appliance Overmolding Clear and heat resistant TPEs Ultra clear grades Ultra soft TPE gels, 30 shore OO FDA, USP Class VI, ISO 10993 approved grades NSF and UL listings Sterilizable under autoclave, radiation, and EtO gas Extrusion, injection, and blow moldable GLS™ THERMOPLASTIC ELASTOMERS * Commercially available in North America only 1 See technical data sheets for complete product details NAME BASE RESIN(S) AVAILABLE FEATURES1 ECCOH™ Polyolefin Flame retardant, low smoke and fume, zero halogen (LSFOH) Cross-linkable grades Chemical, oil, and gel resistant Flexible, low friction, easy-peel, and high speed processing Compatible with Avient additives and color masterbatches FireCon™ CPE, CPE Alloy Low and medium voltage cable jacketing Flame retardant and 90°C deformation resistance Oil resistance RoHS grades available Maxxam™ FR PE, PP UL Yellow Card for plenum applications Halogen-free flame retardant grades available Maxxam™ SY Foamable PP co-polymer Easy processing Variety of final densities available Corrosion resistance Syncure™ XLPE High performance moisture cure technology UL bulletinized XHHW2 and VW1 Temperature, abrasion, and oil resistant WIRE AND CABLE SPECIALTY THERMOPLASTICS To learn more, please visit avient.com or call +1.844.4AVIENT (+1.844.428.4368).

L’utilisation de cette solution colorante dans des emballages rigides en PP avec un taux d’intégration inférieur ou égal à 4% permettra à l’emballage d’être détecté et orienté vers le flux d’emballages en PP avec des performances satisfaisantes. La solution colorante noire CESA® IR PE 94000828 de Avient Corporation utilisée pour colorer des emballages rigides en PP est une alternative aux solutions colorantes non détectables. En effet, les emballages rigides en PP intégrant 4% de solution colorante noire CESA® IR PE 94000828 sont détectés et orientés vers le flux PP avec les mêmes performances (qualité, taux de captage) que les autres emballages rigides ménagers en PP.

Thermoplastics are used in various applications, including PP, PS, ABS, copolyester, SAN, PC etc.. For example, a TPE that can bond to PC does not bond to PP, vice versa. The failure mode is cohesive on PP and adhesive on all other substrates.

PAC K AG I N G C O M P O N E N T M A N U FAC T U R E R P E R F U M E C A P • A density modified formulation - PP filled, 1,2g/cm3 • Needs to contain recycled PP PIR content • Electroplatable - comparable to prime materials • Provide continuity of supply • Utilized formulation expertise to develop a custom material with post-industrial recycled PP content • Provided a more sustainable solution with 60% recycled content while maintaining the performance characteristics of prime PP • Expedited speed to market, delivering material in three weeks Gravi-Tech™ REC Recycled Formulation KEY REQUIREMENTS WHY AVIENT?

The foaming simulation is carried out under confidentiality and is currently available for components made from polypropylene (PP), talcum filled PP, and glass fiber filled PP, with a minimum part thickness of 2mm. KEY CHARACTERISTICS • Provides a mold-filling study • Helps maximize part weight reduction • Predicts mechanical properties • Enables the calculation of necessary clamping force • Reduces physical trials • Optimizes tool design and production processes KEY APPLICATIONS • Components made from polypropylene (PP), talcum filled, and glass fiber filled PP with a minimum part thickness of 2mm • Automotive structural parts e.g., door panels, dashboard carriers • Consumer goods e.g., interior fridge parts, transport boxes and composters, vacuum cleaner base panels PRODUCT BULLETIN Sustainability Spotlight 1 Moldflow® is a registered trademark of Autodesk® * Avient Foaming Prediction Service will provide general information based on available inputs.