These materials are semi-crystalline and deliver excellent chemical resistance, low moisture uptake, and dimensional stability similar to nylon (PA6 and PA66). KEY CHARACTERISTICS • Chemical resistance • Maintaining high impact performance at low temperatures • Low moisture uptake • Dimensional stability comparable to nylon • Higher impact resistance than short fiber alternatives • Eco-conscious alternative to nylons • More cost-effective solution than specialty nylons • Available in non-PFAS* formulations to achieve UL 94 V-0 flame rating at 1.5 mm MARKETS & APPLICATIONS These materials are for use in applications traditionally made of metal requiring moisture, chemical and cold impact performance requirements, including: • Industrial – pipes, tubing, fluid management • Electrical & Electronics – connectors, battery components, battery housings • Transportation – under-the-hood fuel/ chemical contact components, non-structural interior components • Oil & Gas – fuel pump components, fuel doors PRODUCT BULLETIN * Non-PFAS flame-retardant (FR) grades are manufactured without intentionally added PFAS-based raw materials.

Loose buffer tube – made of PBT, PTFE, Nylon 12, PP or other polymers. Outer strength member • Base fiber of Kevlar, E-Glass, Zylon, Vectran LCP • Often be coated with Fiber-Line coatings (Swellcoat, Bondcoat, Wearcoat) 6. Binder • PET, Polyester, Kevlar yarns coated with Swellcoat (absorbs and blocks water) 2 3 4 5 7 6 8 9.

Base Resin PC PC/PSU PES PEI PP ABS PEEK PA Barrel Temperatures* °F (°C) Rear Zone 530–560 (277–293) 550–575 (288–302) 660–700 (349–371) 675–725 (357–385) 390–420 (199–216) 425–460 (219–238) 680–730 (360–388) 430–500 (221–260) Center Zone 515–560 (269–288) 540–565 (282–296) 650–690 (343–366) 655–710 (352–377) 380–405 (193–207) 415–450 (213–232) 670–710 (354–377) 420–490 (216–254) Front Zone 510–525 (266–274) 530–555 (277–291) 640–680 (338–360) 655–700 (346–371) 370–395 (188–202) 405–440 (207–227) 650–690 (343–366) 410–480 (210–249) Nozzle 520–535 (271–280) 540–565 (282–296) 650–690 (343–366) 665–710 (352–377) 380–400 (193–204) 415–450 (213–232) 660–700 (349–371) 420–490 (216–254) Melt Temperature 525–560 (274–293) 530–580 (277–304) 650–700 (343–371) 660–730 (349–388) 375–395 (191–202) 410–460 (210–238) 650–730 (343–388) 420–500 (216–260) Mold Temperature 175–250 (80–121) 160–220 (71–104) 280–350 (138–177) 275–350 (135–177) 100–135 (38–57) 150–180 (66–82) 300–425 (149–219) 160–230 (71–110) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 0.5–2.0 Back Pressure psi 50 Screw Speed rpm 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70** Drying Parameters °F (°C) 6 hrs @ 250 (121) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 250 (121) 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.0:1–2.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Reverse Taper Clamp Pressure 5–6 Tons/in2 * A reverse temperature profile is important to obtain optimum conductive properties. Cut vent depths to: - PC Compounds: 0.001"–0.002" depth and 0.250" width - PC/PSU Compounds: 0.002"–0.003" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PEI Compounds: 0.001"–0.003" depth and 0.250" width - PP Compounds: 0.001"–0.002" depth and 0.250" width - ABS Compounds: 0.0015"–0.0025" depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" min. depth and 0.250" width • Increase vent depth to 0.040" (1.0mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

BASE RESIN PPA PC PSU PES PPS CO- POLYMER ACETAL PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 520–560 (271–293) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 530–570 (277–299) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 550–580 (288–305) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 550–600 (288–316) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 560–600 (293–316) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 150–225 (66–107) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 300 (150) 4 hrs @ 250 (121) 2 hrs @ 200 (93) 3 hrs @ 300 (150) 4 hrs @ 180 (82) Allowable Moisture % < 0.05 < 0.02 < 0.02 < 0.04 < 0.02 0.15–0.20 < 0.02 0.10–0.20 Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties. Cut vent depths to: - PPA Compounds: 0.0015"–0.0025" depth and 0.250" width - PC Compounds: 0.002"–0.004" depth and 0.250" width - PSU Compounds: 0.003"–0.004" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PPS Compounds: 0.002"–0.003" depth and 0.250" width - Acetal Compounds: 0.0015" minimum depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" minimum depth and 0.250" width • Increase vent depth to 0.060" (1.5mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

Base Resin PPA PC PSU PES PPS Co- polymer Acetal PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 550–590 (288–310) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 570–600 (300–316) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 580–630 (304–322) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 580–630 (304–322) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 580–625 (304–330) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 190–250 (88–121) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 250 (121) 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties. Cut vent depths to: - PPA Compounds: 0.0015"–0.0025" depth and 0.250" width - PC Compounds: 0.002"–0.004" depth and 0.250" width - PSU Compounds: 0.003"–0.004" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PPS Compounds: 0.002"–0.003" depth and 0.250" width - Acetal Compounds: 0.0015" minimum depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" minimum depth and 0.250" width • Increase vent depth to 0.060" (1.5mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

Develop and implement solutions to end plastic waste while supporting AEPW $1.5B investment in key initiatives. 2 0 3 0 S U STA I NA B I L I T Y TA RG E TS Avient Corporation 5 P RO D U C T S 8 W A Y S W E H E L P C U S T O M E R S B E M O R E S U S T A I N A B L E T R E N D S I N F O C U S Avient Corporation 6 RECYCLING / CIRCULAR ECONOMY LIGHTWEIGHTING ECO-CONSCIOUS S U S TA I NA B L E S O LU T I O N S F O R T H E C I RC U L A R E C O N O M Y Avient Corporation 7 OPTICA™ TONERS FOR PET LACTRA™ SX LIGHT BLOCKING ADDITIVE FOR PET AMOSORB™ OXYGEN SCAVENGER FOR PET JOULE™ & SMARTHEAT™ INFRARED ABSORBER ULTIMATE™ UV LIGHT BARRIER CESA®-NATUR BIO-SOURCED ADDITIVES TRIPLE A™ ACETALDEHYDE SCAVENGER FOR PET IR SORTABLE BLACK FOR RECYCLABLE PACKAGING EZE™ SLIP AGENT FOR PET ONCOLOR™ NATURALS – COLORANTS FOR RECYCLABLE PACKAGING RESOUND™ OM THERMOPLASTIC ELASTOMERS VERSAFLEX™ POST- CONSUMER RECYCLED (PCR) TPE FORMULATIONS AV I E N T C YC L E WO R KS I N N O V A T I O N C E N T E R T O A D V A N C E T H E C I R C U L A R E C O N O M Y • Laboratory mimics real-world circular recycling in a research environment • Conducts chemistry testing to improve plastics recycling for customers • Screening and evaluation of additive and colorant systems during recycling • Collaboration platform for customers and value chain partners Avient Corporation 8 Avient Corporation 9 AV I E N T E NA B L E S C U STO M E R S ’ C I RC U L A R E C O N O M Y G OA L S C O L O R M A T R I X ™ P R O C E S S A I D & T O N E R F O R R E C Y C L E D P E T L I G H T W E I G H T I NG Avient Corporation 10 NYMAX™ NYLON FORMULATIONS HYDROCEROL® CHEMICAL FOAMING AGENTS POLYSTRAND™ TAPES AND LAMINATES COMPLĒT™ LFT ENGINEERED RESINS W H AT ’ S H A P P E N I N G A V I E N T S O L U T I O N S PLASTICS ARE: AV I E N T S O LU T I O N S E NA B L E L I G H T W E I G H T DA S H B OA R D S K I N S H Y D R O C E R O L ® F O A M I N G A G E N T S O L U T I O N S Avient Corporation 11 E C O - C O N SC I O U S Avient Corporation 12 ONCOLOR™ BRILLIANT METALLIC COLORANTS W H AT ’ S H A P P E N I N G ONCOLOR™ WPC CAPSTOCK TECHNOLOGY ZODIAC™ AQUARIUS™ WATER BASED SCREEN PRINTING INKS MAGIQ™ FIBER COLORANTS & ADDITIVES SAFER & CLEANER MATERIALS RESOURCE CONSERVATION HUMAN HEALTH & SAFETY ECO-CONSCIOUS ALTERNATIVES A V I E N T S O L U T I O N S AV I E N T E C O - C O NS C I O U S S O LU T I O N S I M P ROV E FAC E M A S K P E R F O R M A N C E Avient Corporation 13 M A G I Q ™ E L E C T R E T P L U S T E C H N O L O G Y Improved filtration efficiency Protects against aerosols & bacteria particles Increased shelf-life ENERGY INTENSITY 9% DECREASE WASTE INTENSITY 2% DECREASE WATER INTENSITY 20% DECREASE TOTAL CO2 EMISSIONS 29% DECREASE P L A N ET K E Y P E R F O R M A N C E I N D I C A T O R S 2 0 1 6 - 2 0 1 9 56 ENERGY REDUCTION PROJECTS SAVE 7400+ MT/CO2 ANNUALLY PUNE, INDIAASSESSE, BELGIUM Avient Corporation 14 • Avient is a founding member • Cross value chain collaboration • Driving breakthrough innovations R E V E N U E F RO M S U S TA I N A B L E S O LU T I ON S 2016 2017 2018 2019 2020PF VOC Reduction Reduced Energy Use Bio-derived Content Eco-conscious Renewable Energy Applications Recyclability Reduced Material Requirements Lightweighting $275M $325M $355M $410M $560M (1) Proforma to include a full year of Clariant Masterbatch business acquisitionAvient Corporation 16 Revenue from sustainable solutions expected grow at an 8-12% CAGR into the future (1) THANK YOU Avient Corporation 17

A LOOK INTO THE FUTURE VIRTUAL REALITY APPLICATION BULLETIN AESTHETIC APPEAL Metallic and Custom Effects, FDA-Approved Masterbatch Colorants SOLUTION: Custom Polymer Colorants, Pre-Colored Resins WEARABLE COMFORT Flexibility, Skin- Compatible Comfort, Soft Touch, Heat Reduction SOLUTION: Thermoplastic Elastomers (TPEs), Thermoplastic Urethanes (TPUs), Silicone, Nylon (PA) FUNCTIONALITY Impact Resistance, Dimensional Stability, Strength SOLUTION: Copolyester, PC/ Polyester Blends, Polycarbonate, Styrenics BETTER EXPERIENCES. DURABILITY Impact Strength, Rigid or Flexible Materials SOLUTION: Thermoplastic Elastomers (TPEs), Thermoplastic Urethanes (TPUs), Copolyester, Polycarbonate, PC Blends, PMMA, Styrenics, Nylon (PA), Silicone SURFACE PROTECTION Performance Enhancing Additives SOLUTION: Antimicrobial Additives, Scratch and Mar Additives ERGONOMICS Soft Touch, Easy to Grip SOLUTION: Thermoplastic Elastomers (TPEs), Thermoplastic Urethanes (TPUs), Silicone TOUGHNESS Impact Strength, Chemical Resistance SOLUTION: PC/Polyester Blends, Copolyester WEAR PERFORMANCE Wear-Resistance SOLUTION: Polyester (PET), Nylon (PA), Acetal (POM) DISCOVER.

DURABILITY High Impact Strength, Weatherability SOLUTION: PP, HDPE, ASA, Nylon Engineered Formulations AESTHETIC APPEAL Custom Color & Special Effects, Paint Replacement SOLUTION: Custom Polymer Colorants, Pre-Colored High-Gloss Thermoplastics THERMAL MANAGEMENT LED Heat Sinks, Design Flexibility SOLUTION: Thermally Conductive Formulations EXTREME PERFORMANCE Chemical & Fire Resistance, High Temperature Performance SOLUTION: Nylon Engineered Formulations, Long Fiber Reinforced Composites, Continuous Fiber Composite Tapes & Laminates, Flame Retardant Polyolefin Formulations STRUCTURAL INTEGRITY High Stiffness-to-Weight Ratio, Metal Replacement SOLUTION: Pultruded Rods, Tubes & Custom Profiles, Long Fiber Reinforced Composites SENSORY EXPERIENCE Vibration Damping, Durability, Customization, Custom Color, Low Friction SOLUTION: Thermoplastic Elastomers (TPEs), Custom Polymer Colorants, Internally Lubricated Formulations, Advanced Composite Springs STRENGTH & STABILITY Excellent Dimensional Stability, High Stiffness, Impact Resistance SOLUTION: Short & Long Fiber Formulations, Continuous Fiber Composite Tapes & Laminates SURFACE PROTECTION Performance Enhancements SOLUTION: Scratch & Mar Resistance, UV Stable Additives, Anti-Static Additives STRUCTURAL PERFORMANCE Corrosion Resistance, Lightweighting SOLUTION: Long Fiber Reinforced Composites, Nylon Engineered Formulations, Continuous Fiber Composite Tapes & Laminates, Chemical Foaming Additives METAL REPLACEMENT Lightweighting, Heat Management, Load Carrying Capability SOLUTION: Long Fiber Reinforced Composites, Continuous Fiber Composite Tapes & Laminates TACTILE EXPERIENCE Soft-Touch Feel, Durability SOLUTION: Thermoplastic Elastomers (TPEs) A COLLABORATION THAT BRINGS STYLE & GRIT To all thrill seekers, fans and enthusiasts, your brand says, “Bring it!”

Nylon Alternatives for Powersports Applications Orange Nylon Colorants for High-Voltage EV Connectors (Chinese) Orange Nylon Colorants for High-Voltage EV Connectors (English)