Once connected, FlexOne self-calibrates its output and then tracks the input signal from the host machine allowing the unit to accurately meter the required color or additive for the process.

ONFLEX™ HT ONFLEX™ AF 7210 ONFLEX™ S KA ONFLEX™ S KG Applications Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Defining Characteristic High temperature sealing performance Ambient temperature sealing performance High temperature sealing performance Ambient temperature sealing performance Density 1.00 g/ml 0.99 g/ml 1.10 g/ml 1.13 g/ml Physical Properties Tensile Strength 6.0–10.0 MPa 5.0–11.5 MPa 3.0–7.5 MPa 2.6–4.9 MPa Tear Resistance 25.0–37.0 kN/m 21.0–43.0 kN/m 17.0–46.0 kN/m 16.0–29.0 kN/m Compression Set 73°F (23°C) 72hrs 12–27% 16–32% 13–23% 31–35% 158°F (70°C) 22hrs 28–44% 32–43% 29–38% 62–66% 212°F (100°C) 22hrs 45–53% 56–60% 54–57% 80–85% Hardness 40–80 Shore A 40–80 Shore A 40–80 Shore A 40–80 Shore A Overmolding Substrate Polypropylene/ Polyethylene Polypropylene Polyamide Polyamide Processing Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion HOW GLS TPEs MAKE THE DIFFERENCE IN AUTOMOTIVE FASTENERS AND CLIPS • Low compression set – coupled with good stress relaxation, our automotive TPEs are designed to maintain a good seal over time and reduce noise generated by vibration • High temperature performance – Avient automotive TPEs provide good sealing performance in temperatures up to 100°C/212°F • Bonding performance - strong chemical bond to polypropylene, polyethylene, and polyamide • Process flexibility - grades can be both injection molded and extruded • Easy to color - can be colored at the machine • Reduced production steps - some grades do not require pre-drying • Low VOC/FOG - OnFlex HT™ has been externally tested to VDA 278 and is proven to help satisfy vehicle interior air quality (VIAQ) regulatory requirements • Single source supply – we can streamline your supply chain with the ability to provide polymer colorants, engineered thermoplastics, and thermoplastic elastomers from a single source • Global support - we provide production, technical, and commercial support in locations convenient to your operations, including North America, Europe, and Asia To learn more about GLS TPEs for automotive applications, visit www.avient.com or call +1.844.4AVIENT (1.844.428.4368).

PRODUCT SELECTION GUIDE AESTHETIC APPEAL Custom Colors, Special Effects, Color Stability SOLUTION: Custom Polymer Colorants, Pre-Colored Materials POSSIBILITIES: Grips, Stocks, Frames, Magazine Bases DYNAMIC COMFORT Shock Absorption, Vibration Damping SOLUTION: Thermoplastic Elastomers POSSIBILITIES: Recoil Pads, Straps TACTILE EXPERIENCE Soft Touch, Wet Grip SOLUTION: Thermoplastic Elastomers POSSIBILITIES: Grips, Slides, Triggers PERFORMANCE & FUNCTION Custom Weight, Toughness, Reduced Machining, Metal Replacement, Thermal Management and Stability, Wear Resistance SOLUTION: Structural Reinforced Formulations, Super Tough Formulations, Composite Heat Release Technology, High-Density Modified Formulations, Internally Lubricated Formulations POSSIBILITIES: Stocks, Frames, Barrels 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

They are metered into the PET stream just above the feed throat of the injection molding machine or extruder, using a Avient supplied ColorMatrix liquid metering system.

D’autre part, les Fabricants de T.O. se sont engagés auprès du COTREP, à : - suivre le protocole dans son intégralité ; - réaliser les tests en utilisant les technologies et les paramètres machines représentatifs de ceux utilisés dans les centres de tri actuels et dans des conditions normales d’exploitations.

D’autre part, les Fabricants de T.O. se sont engagés auprès du COTREP, à : - suivre le protocole dans son intégralité ; - réaliser les tests en utilisant les technologies et les paramètres machines représentatifs de ceux utilisés dans les centres de tri actuels et dans des conditions normales d’exploitations.

D’autre part, les Fabricants de T.O. se sont engagés auprès du COTREP, à : - suivre le protocole dans son intégralité ; - réaliser les tests en utilisant les technologies et les paramètres machines représentatifs de ceux utilisés dans les centres de tri actuels et dans des conditions normales d’exploitations.

KEY CHARACTERISTICS • Superior strength-to-weight ratio • Exceptional mechanical performance— consistent and repeatable • Deep deflection • Corrosion resistance • High fatigue resistance & tensile strength • Excellent interlaminar shear strength • Lighter weight than steel • High modulus of elasticity • High temperature performance • Low VOCs VALUE SOLUTION • Ideal in applications where high stiffness and light weight performance are critical • Replacement of metal, wood, and other less efficient materials in order to improve overall product performance while reducing weight, cost, and complexity • Part consolidation • Simplified assembly • A good choice for constant cross-section profiles • Laminates available in continuous lengths • Specialty surface treatments available to improve bonding • Full machining capabilities (surface modification, drilling, shaping, waterjet, etc

Prototype Capabilities • First articles • Burn off (pyrolysis) studies to analyze fiber retention and performance • Customer trials to display new program tooling • Agile formulation modification, if determined it’s needed after first article runs • Injection molding machines ranging from 50–550 ton Avient’s unique combination of materials, design expertise, and technical services enables us to conquer challenges and unlock the potential of innovation in meaningful and dynamic ways for customers around the world.

KEY CHARACTERISTICS • UL 94 V-2, V-0, 5VA ratings and elevated RTI ratings • GWFI (IEC 60695-11-10) up to 960°C • Comparative Tracking Index (CTI) PLC 0, 600V ratings • Injection molding and extrusion grades • Non-halogen grades available • Low dielectric performance with selected formulations • Good recyclability • Colorable MARKETS & APPLICATIONS Applications that require flame retardant performance including: • Transportation: Interior components, seat components, door panels, aircraft interiors, railway interiors, boat interiors • Construction & Building Materials: Cable insulation, pipes and fittings, insulation materials • Consumer – Appliance casings, housings, covers, fume hoods, battery packages, furniture • Industrial Equipment: Machine housings • Energy, Electrical & Electronic, E-Mobility: Battery frames, electrical housings, connectors • Telecommunication: Cable management • Packaging: Transportation of sensitive goods • Healthcare: Medical device housings and components PRODUCT BULLETIN MAXXAM FR FLAME RETARDANT POLYOLEFIN FORMULATIONS Non-halogenated Halogenated PP Homopolymer Copolymer Homopolymer Copolymer Unit Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Characteristic Talcum Talcum Talcum Talcum Reinforcement Mass-% 0 5–30 5–30 0 20–30 5-20 0 5–30 5–20 0 5–30 5–20 Colorable – ++ ++ + ++ ++ + + + + + + + Density g/cm3 0,9–1,08 1,28–1,37 0,98–1,55 0,92–1,06 1,25–1,35 0,95–1,28 0,94–1,04 1,3–1,55 1,01–1,42 0,96–1,01 0,94–1,58 0,95–1,46 Tensile Strength MPa 25–30 30–70 25–35 16–22 40–65 15–25 25-–35 30–70 25–35 20–24 20–55 -25 E-Modulus (Tensile) MPa 1600–2500 2500–8200 2500–4000 800–1200 2000–8000 1600–3000 1300–2000 3000–8900 1900–3500 1000–1400 1200–7500 1500–3000 Izod Impact 23°C notched % 2,0–4,5 3,5–7,5 2,5–4,5 5–40 2,5–18 2,5–6 2,5–4,5 3,5–6,0 3,0–7,0 4,0–40 2,5–16 2,5–10 Max.