ORANGE 172C PA6 ORANGE 172C PA6 ORANGE 172C PA6

NYMAX/BERGAMID原生尼龙产品系列 Nymax/Bergamid系列PA6和PA66聚合物专为满足严苛 应用的关键性能要求而设计，具备符合严格技术规范的出色 机械性能。 这些材 料以尼龙6（PA6）和尼龙66（PA66）聚合物为基础，具备高温性能以及超高的强度和耐久性。 了解更多PA6和PA66解决方 案的信息，请与埃万特联系： +86.21.60284888

Temperature, time, dew point setting, minimum and maximum moisture guidelines for Polypropylene (PP), Rigid Thermoplastic Polyurethane (ETPU),  Nylon 6 (PA6), Nylon 66 (PA66), Polyketone (PK), Polyphenylene Sulfide (PPS), Polyphthalamide (PPA), Polyetherimide (PEI), Polyethersulfone (PES), and Polyetheretherketone (PEEK)  Temperature (rear feed zone, center transition zone, front metering zone, nozzle, melt, and mold) guidelines for PP, ETPU,  PA6, PA66, PK, PPS, PPA, PEI, PES, and PEEK 

The production of PK emits up to 61 percent less carbon dioxide (CO₂) than nylon (PA66 and PA6). Reduced carbon footprint over PA66 and PA6 Explore specialty polyketone grades that go head-to-head with PA66, PA6 and POM.

The polymer structure of PK is very similar to PA6 and PA66, which explains their similar performance. This makes PK much less hygroscopic and less sensitive to moisture conditioning than PA6 and PA66. Gasoline - 30% glass-filled (GF) grade, dry as molded (DAM), room temperature Testing methodology is an adaptation from ASTM D543 • Reapply freshly soaked gauze pad every 24 hours to prevent from drying out • Repeat for a total of 72 hours • Tensile properties recorded *Chemical resistance data for DEET, motor oil, glass cleaner, and sunscreen available upon request KEY CHARACTERISTICS Figure 1 Figure 2 3.34 3.84 3.63 1.96 2.21 0.99 3.43 3.86 3.93 1.76 3.49 2.01 3.26 3.66 3.74 1.45 1.06 0.989 2.98 3.99 3.41 1.41 1.07 0.88 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 30% LGF PKE 30% LGF PA6 30% LGF PA66 30% SGF PKE 30% SGF PA6 30% SGF PA66 Ft -lb /in Notched Izod Impact ASTM D256 23C DAM 23C Conditioned -40C DAM -40C Conditioned 1.47 1.37 1.37 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Glass-Filled PKE Glass-Filled PA6 Glass-Filled PA66 g/ cm 3 Density of Polyketone vs Nylon ASTM D792 LESS MOISTURE ABSORPTION THAN NYLON 30% Short Glass Fiber (SGF) Comparison Moisture uptake, environmental chamber 62% RH, 70°C SIMILAR DENSITY TO NYLON ASTM D792 COMPARABLE AND CONSISTENT IMPACT PERFORMANCE* Notched Izod Impact (ASTM D256) of LGF and SGF for DAM and Conditioned Materials *3,000 hr weathering data available upon request KEY CHARACTERISTICS 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

Developed in Asia, these PA6 and PA66 grades are formulated with 20-100% PCR nylon Developed in North America & Asia these PA6 and PA66 formulations contain 20-100% PIR nylon Developed in North America, these black super tough PA6 and PA66 formulations contain 76-78% PIR nylon

KEY CHARACTERISTICS • Excellent chemical resistance • Low moisture uptake • Comparable dimensional stability to nylon • Reinforced with 10–40% short glass fiber • High impact and wear resistance • Cost competitive • Eco-conscious alternative to PA66 and PA6 • Non-halogen, flame retardant performance MARKETS & APPLICATIONS These glass-reinforced materials meet the challenges found in chemical, fuel contact, and high moisture environments CO2 Emission Factor — PKE-GF — PA6-GF — PA66-GF HDT Wear Density 5 4 3 2 1 0 Equilibrium Moisture 1: Poor 3: Good 5: Excellent

ONCOLOR™ UL 94 COLORANTS HOW TO USE THE TABLES UL HB GENERIC RESIN TYPE FLAME RATING MINIMUM THICKNESS (MM) MAXIMUM LET-DOWN RATIO Acetal Copolymer (POM) HB 1.50 1:20 Acrylonitrile Butadiene Styrene (ABS) HB 1.50 1:10 Ethylene Propylene Thermoplastic Rubber (EPTR) HB 1.50 1:20 High Impact Polystyrene (HIPS) HB 1.50 1:10 Liquid Crystal Polymer (LCP) HB 0.83 1:10 Polyamide (PA) HB 3.20 1:33 Polyamide (PA66 and PA 4/6) HB 0.81 1:20 Polyamide 6 (PA6) HB 0.75 1:25 Polyamide 66 (PA66) HB 0.40 1:40 Polybutylene Terephthalate (PBT) HB 0.81 1:20 Polybutylene Terephthalate/Polycarbonate (PBT/PC) HB 1.50 1:10 Polycarbonate (PC) HB 1.50 1:15 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) HB 1.50 1:20 Polycarbonate/Polyethylene Terephthalate (PC/PET) HB 1.50 1:20 Polyethylene (PE) HB 1.50 1:50 Polyethylene Terephthalate (PET) HB 0.80 1:16.7 Polyketone HB 1.50 1:20 Polymethyl Methacrylate (PMMA) HB 3.00 1:25 Polypropylene (PP) HB 1.50 1:15 Polystyrene (PS) HB 0.83 1:15 Polyurethane (PUR) HB 1.50 1:25 Polyvinylchloride (PVC) HB 1.50 1:20 Styrene Acrylonitrile (SAN) HB 1.50 1:20 Thermoplastic Elastomer (TPE) HB 0.75 1:25 UL 94 V-0, V-1, V-2 ASCEND GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 66 (PA66) 21X1(a)(f2), 21SPC1(a)(f2), 21SPF1(a)(f2), 21SPG1(a)(f2), 21SPM1(a)(f2), 20NSP1(a)(f2) 0.75 V-2 1:40 22HSP(e) 0.75 V-2 1:40 64C-R 3.0 V-2 1:50 ECO366(e) 0.4 V-0 1:40 ECO366H(e) 0.2 V-0 1:25 FR350J 0.4 V-0 1:25 20NSP(a)(f2), 21SPF(a)(f2), 21SPM(a)(f2), 21SPC(a)(f2) 0.4 V-2 1:40 20NSP(a)(h)(f2), 21SPF(a)(h)(f2), 21SPM(a)(h)(f2), 21SPC(a)(h) (f2) 1.5 V-2 1:20 Polyamide 66/6 (PA66/6) ECO315(e), ECO315J(e) 0.4 V-0 1:40 M344 3.0 V-0 1:25 909 0.75 V-0 1:25 UL 94 V-0, V-1, V-2 BASF GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 6 (PA6) 8202(t1), 8202 Blend (t1) 0.71 V-2 1:25 8202C(t1), 8202C BLEND (t1) 1.50 V-2 1:25 8202CHS(t1) (t3), 8202C HS Blend 1.50 V-2 1:25 8202HS(t1) 1.50 V-2 1:25 B3S 0.80 V-2 1:25 1.50 V-2 1:25 B3S Q661 1.50 V-2 1:25 B3S R03 1.50 V-2 1:25 8232G HSFR(t9), B3U10G5 (t9) 1.50 V-0 1:25 Polyamide 6/66 (PA6/66) C3U (m) 0.40 V-0 1:25 KR4205(m), C3U (m), C3U (t)(m) 0.40 V-0 1:25 KR4205, C3U 0.40 V-0 1:25 Polyamide 66 (PA66) 1000(b), 1310-(b), Ultramid A3K Q603(+) 1.50 V-2 1:10 A3K (o) Q790(g)(f2) 0.41 V-2 1:20 A3K(f2), A3K Q601(f2) 0.41 V-2 1:20 A3SK 0.41 V-2 1:25 A5 3.00 V-2 1:33 A3W(f1), A3W FC (f1) 0.75 V-2 1:10 A3K R01 (t)(g)(f2) 0.40 V-2 1:20 Polybutylene Terephthalate (PBT) B4406 G2 (o) Q798 1.50 V-0 1:20 B4406 G2(a), B4406 G2 (o) Q717(a) 1.50 V-0 1:20 B4406 G3 (o) Q798 1.50 V-0 1:20 B4406 G3(a), B4406 G3 (o) Q717(a) 1.50 V-0 1:20 B4406 G4 (o) Q798 1.50 V-0 1:20 B4406 G4(a2), B4406 G4 (o) Q717(a2) 1.50 V-0 1:20 B4406 G6 (o) Q798 3.00 V-0 1:12.5 B4406 G6(%) 1.50 V-0 1:20 B4406 G6(a1), B4406 G6 (o) Q717(a1), B4406 G6 (o) Q717 High Speed(a1) 1.50 V-0 1:20 B4406(a), B4406 (o) Q717(a) 1.50 V-0 1:20 B4406@ 1.50 V-0 1:20 B4450 G5, B4450 G5 (t) 0.40 V-2 1:50 Polyurethane (PUR) 11 85 A(a) FHF 000 (f2) 0.75 V-0 1:33 UL 94 V-0, V-1, V-2 CELANESE GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Liquid Crystal Polymer (LCP) A130(+), MT1310 1.50 V-0 1:40 Polyamide (PA) 132F(+)(f1), 135F(+)(f1) 0.75 V-2 1:20 HTNFR42G30NH 0.40 V-0 1:25 Polyamide 6/12 (PA6/12) 151, 151L 1.50 V-2 1:25 Polyamide 66 (PA66) A3 GF 25 V0XI 0.40 V-0 1:25 101(r9)(f1), 101F(r9)(f1), 101L(r9)(f1) 0.75 V-2 1:20 103FHS(+), 103HSL(+) 0.75 V-2 1:20 FR50(+)(f1) 0.35 V-0 1:20 FR7025V0F(+) 0.50 V-0 1:33 Polyamide 66/6 (PA66/6) FR72G25V0 0.80 V-0 1:25 Polyamide 66/6T (PA66/6T) FR95G25V0NH 0.40 V-0 1:25 HTNFR52G30BL(r3) 0.75 V-0 1:33 HTNFR52G30L(+), HTNFR52G30(+) 0.75 V-0 1:33 HTNFR52G30NH(r6) 0.40 V-0 1:25 0.75 V-0 1:10 HTNFR52G35BL 0.75 V-0 1:25 HTNFR52G35(+), HTNFR52G35 0.75 V-0 1:33 Polyamide 6T/ MPMDT HTNFR51G35L(+) 0.81 V-0 1:33 Polybutylene Terephthalate (PBT) 2016(b) 1.50 V-0 1:20 3116(b) 1.50 V-0 1:20 3216(b) 1.50 V-0 1:20 3316(b) 1.50 V-0 1:20 3316HF 1.50 V-0 1:20 LW9030FR 1.50 V-0 1:25 T841FR (r4) 1.50 V-0 1:25 Polyethylene Terephthalate (PET) FR530(l)(+)(f1), FR530L(l)(+)(f1) 0.75 V-0 1:25 Thermoplastic Elastomer (TPE) HTR8068 1.60 V-0 1:25 UL 94 V-0, V-1, V-2 DOMO GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide (PA) J 60X1 V30 0.40 V-0 1:25 Polyamide 6 (PA6) PSB 286 0.80 V-2 1:25 3.00 V-2 1:25 S 60X1 V30 0.75 V-0 1.25 Polyamide 66 (PA66) A 205F(r4) 0.38 V-2 1:25 A 225F 0.75 V-2 1:25 A 50H1 (r3)(f2) 0.40 V-0 1:25 A 30G1 0.40 V-0 1:25 COVESTRO GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polycarbonate (PC) 2407 + (z)(f1) 0.75-2.60 V-2 1:10 2807 + MAS183 0.75 V-2 1:25 6455 + (z) 3.00 V-0 1:25 1.50 V-2 1:25 6485 + (z)(f1) 1.50 V-0 1:25 Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) FR110 + 1.50 V-0 1:33 FR3005 HF + (z), FR3005 HF + BBS314 1.50 V-0 1:12.5 FR3010 + (z) 3.00 V-0 1:25 1.50 V-0 1:25 FR3010 HF + 3.00 V-0 1:25 FR3030 + 3.00 V-0 1:25 UL 94 V-0, V-1, V-2 ENVALIOR GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 46 (PA46) TE250F6(h1)( j) 0.50 V-0 1:25 Polyamide 6 (PA6) F223-D(f1), F223-D /A(f1) 0.75 V-2 1:25 K222-KGV5(f1) 0.75 V-2 1:16.7 1.50 V-2 1:16.7 K-FKGS6/B(f1)(y) 0.80 V-0 1:25 Polyamide 66 (PA66) SG-KGS6/HV 0.75 V-0 1:25 Thermoplastic Elastomer (TPE) PL460-S 1.60 V-0 1:25 Polyamide 4T (PA4T) T11 (h) 0.40 V-0 1:20 UL 94 V-0, V-1, V-2 EXXONMOBIL LANXESS GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Ethylene Propylene Thermoplastic Rubber (EPTR) 251-80W232(f7) 1.50 V-2 1:20 251-92W232 1.50 V-0 1:20 251-70W232 1.50 V-0 1:10 1.00 V-2 1:10 GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 6 (PA6) B30S+(f1) 1.50 V-2 1:25 B31SK+ 1.50 V-2 1:25 Polybutylene Terephthalate (PBT) B4235+ 1.50 V-0 1:10 TP364-302+, BF4232+(f1) 0.75 V-0 1:25 UL 94 V-0, V-1, V-2 SABIC GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polybutylene Terephthalate (PBT) 310(w) 1.50 V-0 1:20 310SE0(w) 1.50 V-0 1:20 310SE0(w),310SE0R(w) 1.50 V-0 1:20 420SE0(f1)(w)(GG)(rr1) 1.50 V-0 1:20 420SE0(f1)(w)(GG)(rr2) 1.50 V-0 1:20 457(w) 1.50 V-0 1:20 457(w), 451(w) 1.50 V-0 1:20 553(a)(f1)(w) 1.50 V-0 1:20 553(a)(f1)(w), 553E(a)(f1)(w), 553U(a)(f1)(w) 1.50 V-0 1:20 553(w)(f1), 553M(w)(f1) 1.50 V-0 1:20 DR48(w) 1.50 V-0 1:20 DR48,DR48M 1.50 V-0 1:20 V4760(a2) 0.40 V-0 1:20 EXVX1259, ENH4550 0.40 V-0 1:20 771 0.75 V-0 1:25 Polybutylene Terephthalate/ Polycarbonate (PBT/PC) 357(f1)(w)(IC), 357M(f1)(w)(IC), 357U(f1)(w)(IC) 1.50 V-0 1:20 357(f1)(w)(IC), 357U(f1)(w)(IC) 1.50 V-0 1:20 357X(f1) 1.50 V-0 1:20 V3900WX(GG)(f1)(IA), V3901WX(GG)(f1)(IA) 3.00 V-0 1:20 1.50 V-0 1:20 357(w)(f2)(IC), 357M(w)(f2)(IC), 357U(w)(f2)(IC) 1.50 V-0 1:20 UL 94 V-0, V-1, V-2 SABIC GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polycarbonate (PC) 221(f2) 1.50 V-2 1:25 221R(f2) 1.50 V-2 1:25 500(f2), 500R(f2) 3.00 V-0 1:33 503(f1) 3.00 V-0 10:1 1.50 V-0 10:1 503(f1), 503R(f1) 3.00 V-0 10:1 1.50 V-0 10:1 943(ab) 1.50 V-0 1:20 943(f1) 1.50 V-0 1:20 943(f1), 923(f1) 1.50 V-0 1:20 950A, 920ASR, FXD911A(GG), 940ASR 1.50 V-2 1:25 CFR7630(f1)(gg*) 1.50 V-0 1:25 ML5139R(f2) 3.00 V-0 1:33 950A, FXD911A(GG), 940ASR 3.00 V-0 1:25 943 1.50 V-0 1:20 920A 3.00 V-0 1:25 1.50 V-2 1:25 Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) C2950 1.50 V-0 6:100 C6200(GG) 2.00 V-0 1:20 Acrylonitrile Styrene Acrylate/ Polycarbonate (ASA/PC) HRA222 (GG) 0.80 V-2 1:20 UL 94 V-0, V-1, V-2 SOLVAY (SYENSQO) OTHERS GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyphenyl Sulfone (PPSU) R-5100 (r1)(##), R-5000 (r1)(##) 1.50 V-0 1:10 Polyphthalamide (PPA) AFA-4133 V0(+) (*) 0.75 V-0 1:25 BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO ALBIS Polypropylene (PP) PP 13 CV2 14 1.50 V-2 1:25 AVIENT Polyvinylchloride (PVC) M3700(X), M3755(X) 1.50 V-0 1:25 M3900 1.50 V-0 1:25 CHI MEI Acrylonitrile Butadiene Styrene (ABS) PA-765(+) 1.50 V-0 1:10 Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) PC-510(+) 1.50 V-0 1:25 EMS-CHEMIE Polyamide 6 (PA6) Grilon A 26 V0 0.75 V-0 1:25 FORMOSA Polycarbonate (PC) #1700+(f2) 0.36-0.42 V-2 1:50 GEON Polyvinylchloride (PVC) 85891(f1) 1.70 V-0 1:20 85891(f2) 1.70 V-0 1:20 M3700(X) 1.50 V-0 1:25 M3900 1.50 V-0 1:10 1:25 INEOS Polystyrene (PS) 855 HV 3.00 V-1 100:4 INVISTA Polyamide 66 (PA66) FRU4800 XHL (r1) 0.40 V-0 1:25 U4820L (r1) 0.40 V-2 1:25 UL 94 V-0, V-1, V-2 OTHERS BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO KINGFA Polyamide 66 (PA66) PA66-R11G25 (##) 0.25 V-0 1:25 KURARAY Polyamide 9T (PA9T) GP2300S 0.40 V-0 1:25 LG CHEM Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) LUPOY GP-5106-F 3.00 V-0 1:20 LOTTE CHEMICAL Acrylonitrile Butadiene Styrene (ABS) VH-0800(+) 1.50 V-0 1:25 Polycarbonate (PC) HN-1064(+) 0.75 V-2 1:10 1.50 V-0 1:10 1.20 V-1 1:10 Polystyrene (PS) VH-1800+ 3.00 V-0 1:25 1.50 V-0 1:25 MITSUBISHI Polycarbonate (PC) S-2000+(f1) 1.50-1.80 V-2 1:10 POLYMER PRODUCTS Polystyrene (PS) ZYNTAR 351 2.00 V-0 1:20 1.50 V-0 1:20 ZYNTAR 7000 2.00 V-0 1:25 ZYNTAR 702 2.00 V-0 1:25 8020 2.00 V-0 1:20 8120 2.00 V-0 1:20 8130 1.50 V-0 1:20 POLYMER RESOURCES Polycarbonate (PC) PC-FR1A-D, PC- FR2A-D, PC-FR3A-D 3.00 V-0 1:33 1.50 V-2 1:33 SUMITOMO Liquid Crystal Polymer (LCP) E6007LHF(ra) 0.30 V-0 1:25 E6007LHF-MR(gt) 0.20 V-0 1:12.5 UL 94 V-0, V-1, V-2 OTHERS BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO TORAY Polyamide 6 (PA6) 1017 1.60 V-2 1:16.5 Polyamide 66 (PA66) 3004-V0(rr), CM3004-V0(rr) 0.40 V-0 1:25 TRINSEO Polycarbonate (PC) 891(w) 1.10 V-0 1:25 WELLMAN Polyamide 66/6 (PA66/6) 220-N, 21L-N, 22L-N 1.50 V-2 1:25 WESTLAKE Polyvinylchloride (PVC) 6597(f1), HF-6597(f1) 1.50 V-0 1:25 SP-7107 (f1)(a) 3.00 V-0 1:25 5VA AND 5VB BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING COLORS MAXIMUM LET-DOWN RATIO AVIENT Polyvinylchloride (PVC) M3900 1.50 5VB ALL 1:25 WHITE 1:10 CELANESE Polyamide 66/6T (PA66/6T) FR95G25V0NH 1.50 5VA ALL 1:25 Polybutylene Terephthalate (PBT) LW9030FR 2.00 5VA BLACK 1:25 3.00 5VA ALL 1:25 SK642FR 1.50 5VA BLACK 1:25 COVESTRO Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) FR3010 + (z) 3.00 5VA ALL 1:25 GEON Polyvinylchloride (PVC) M3900 1.50 5VB ALL 1:25 WHITE 1:10 SABIC Polybutylene Terephthalate/ Polycarbonate (PBT/PC) V3900WX(GG)(f1)(IA), V3901WX(GG)(f1)(IA) 3.00 5VA ALL 1:20 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

COMPLĒT REC PCR NYLON 6 COMPARISON Complēt REC PCR PA6 materials are available in black. Complēt LGF50-PA6 Complēt REC LGF50-PA6 Complēt REC LGF50-PA6 Post-Consumer Recycled Resin 0% 50% 100% Long Glass Fiber 50% 50% 50% Tensile Strength 35,000 psi 241 MPa 34,000 psi 234 MPa 31,500 psi 217 MPa Tensile Modulus 2,300 ksi 15,862 MPa 2,250 ksi 15,517 MPa 2,200 ksi 15,172 MPa Flexural Strength 52,000 psi 359 MPa 51,500 psi 355 MPa 51,500 psi 355 MPa Flexural Modulus 2,200 ksi 15,172 MPa 2,150 ksi 14,828 MPa 2,100 ksi 14,483 MPa Izod Notched Impact 5.5 ft-lb/in 294 J/m 4.5 ft-lb/in 240 J/m 4.0 ft-lb/in 214 J/m Izod Un-Notched Impact 25.0 ft-lb/in 1,335 J/m 23.0 ft-lb/in 1,228 J/m 20.5 ft-lb/in 1,095 J/m Complēt LGF50-PA66 Complēt REC LGF50-PA66 Complēt REC LGF50-PA66 Post-Industrial Recycled Resin 0% 50% 100% Long Glass Fiber 50% 50% 50% Tensile Strength 36,000 psi 248 MPa 34,500 psi 238 MPa 34,000 psi 234 MPa Tensile Modulus 2,500 ksi 17,241 MPa 2,400 ksi 16,552 MPa 2,300 ksi 15,862 MPa Flexural Strength 54,000 psi 372 MPa 52,000 psi 359 MPa 51,000 psi 352 MPa Flexural Modulus 2,500 ksi 17,240 MPa 2,400 ksi 16,552 MPa 2,300 ksi 15,862 MPa Izod Notched Impact 5.5 ft-lb/in 294 J/m 4.0 ft-lb/in 214 J/m 3.5 ft-lb/in 187 J/m Izod Un-Notched Impact 22.5 ft-lb/in 1,202 J/m 19.5 ft-lb/in 1,041 J/m 19.0 ft-lb/in 1,015 J/m COMPLĒT REC PIR TPU COMPARISON Complēt REC PIR TPU materials are available in black or natural.