This can be achieved by tumble mixing or by the use of concentrate metering devices. Calculate using Let Down Percentage: Cost/lb of Concentrate x (Let Down Percentage/100) = Coloring Cost Calculate using Let Down Ratio: Cost/lb of Concentrate – Cost/lb of Resin Let Down Ratio +1 = Coloring Cost TWO WAYS TO CALCULATE COLORING COSTS OMNICOLOR™ TROUBLESHOOTING TWO WAYS TO CALCULATE COLORING COSTS SYMPTOM CAUSE REMEDY Color Variation Shot-to-Shot Poor Omnicolor preblending Pigment has insufficient thermal stability More thorough blending Ensure correct machine temperature control Screw Slip Premature melting of Omnicolor Excessive addition rate Reduce heat in feed zone Check addition rate and reduce if necessary Overall Good Distributive Mixing With Streaks or Dots of Another Color Poor pigment dispersion in concentrate Return concentrate for replacement Black Streaks or Splotches Degraded polymer in barrel Clean screw and barrel Poor Distributive Mixing (Streaking) Insufficient plastification See processing instructions Loss of Color Pigment has insufficient thermal stability Change to more heat stable colorant Ensure correct machine temperature control OMNICOLOR™ PROCESSING TEMPERATURES RECOMMENDED MAXIMUM PROCESSING TEMPERATURES FOR OMNICOLOR IN SELECTED POLYMERS IN °C UK COLOR NO.

ISO 9001:2015 The Quality Management System is applicable to: Certificate No: 31307 Certification Date: 12 October 1995 Effective Date: 20 September 2023 Expiration Date: 07 October 2025 Revision Date: 20 September 2023 Dominic Townsend, President MANUFACTURE AND SUPPLY OF PLASTIC COMPOUNDS, COLOR AND PERFORMANCE ADDITIVES, ENGINEERED THERMOPLASTICS, VINYL RESINS, CUSTOM MIXED PLASTIC MATERIALS, CUSTOM AND COMMODITY COLORANTS FOR PLASTICS, POLYURETHANE SYSTEMS, AND PLASTICIZERS WITH DESIGN AND SAMPLING SUPPORT AT SUWANEE, GA, AND PURCHASING, CUSTOMER SERVICE, LOGISTICS, QUALITY, DESIGN AND SAMPLING SUPPORT AT AVIENT CORPORATE HEADQUARTERS AT AVON LAKE, OH, AND DISTRIBUTION OF RESINS This certificate may be found on the ABS QE Website (www.abs-qe.com).

Certificate Avient Corporation A B S Q u al it y E va lu at io n s C er ti fic at io n E Certificate Of ConformanceCertificate Of Conformance This is to certify that the Quality Management System of: Avient CorporationAvient Corporation 33587 Walker Road, Building 428 Avon Lake OH 44012 United States has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: ISO 9001:2015ISO 9001:2015 The Quality Management System is applicable to: Manufacture of plastic compounds, color and performance additives, engineered thermoplastics, vinyl resins, custom mixed plastic materials, custom and commodity colorants for plastics, polyurethane systems, and plasticizers with design and sampling support at Suwanee, GA, and purchasing, customer service, logistics, quality, design and sampling support at PolyOne Corporate Headquarters at Avon Lake, OH, and distribution of resins Certificate No: 31307 Certification Date: 12 OCT 1995 Effective Date: 11 JUL 2024 Expiration Date 07 OCT 2025 Revision Date: 17 JUL 2024 Dominic Townsend, PresidentDominic Townsend, President Copyright as of the Effective Date, ABS Quality Evaluations, Inc.

LIQUID FIBER PRODUCT FEATURES Multiple color production • Depending on the manufacturing set-up, several injection points can be added to enable multiple color production at the same time on a single extruder Batch size flexibility • Fiber producers can manufacture anything from a few kilograms to hundreds of tons using the same simple process Rapid color changes • No extruder contamination and easy color-on, color-off operation increases color change speed Waste reduction • Rapid color changes, precise metering and the ability to adjust color in-line reduces waste during color changeovers Continuous metering & long spin pack life • High pigment and dye concentrations mean fewer pack changes are required • Where color is running low for larger volume runs, low level metering sensors alert operators and packs can be changed without disrupting production In-line IV adjustment • Specialist additives are available to adjust Intrinsic Viscosity (IV) in-line for rPET applications • These additives are available as single products, or can be combined with color to create a multi-functional formulation Color design service • ColorMatrix offers a dedicated color design service to help shorten product development cycles and enhance market agility Liquid color processing • Formulations are stable at temperatures up to 60°C and retain good flow properties at temperatures as low as 10°C • These formulations can help lower yarn friction and abrasion, and there is no fuming or evaporation during production COLORMATRIX FLEXCART LIQUID DOSING SYSTEMS Designed to optimize the benefits of liquid colorant and additive technologies, each ColorMatrix™ FlexCart™ model is highly flexible, and offers high-level dosing accuracy and controllability for all injection molding and extrusion applications. TECHNICAL ANALYSES • DSC: Thermal analyses to characterize polymers, additives and colorants • TGA: Thermogravimetric analysis to evaluate thermal stability, plus inorganic pigment, and carbon black content in the Masterbatch • FT-IR: Infrared spectroscopy for the analysis of raw materials • Incineration oven to determine inorganic content • Melt Flow Tester to measure the Melt Flow Rate of MBs and Polymers • Filter test to measure the dispersion quality and aggregate content of materials contained in the polymer matrix • Intrinsic/Relative Viscosity of Masterbatches and polymers • Moisture content in the liquid colorants, MBs and polymers • UV-Visible spectrometry: instrumental evaluation of the color on yarn to perform quality control, color matchings and recipes adjustments • Yarn testing to evaluate mechanical properties, abrasion, dry heat, rubbing and other characteristics • Our pilot spinning lines have state-of-the-art take-up winders that spin up to 4,500 meters/minute.

RADIO FREQUENCY MATERIALS Maximize your radio frequency (RF) performance with PREPERM™ materials OPTIMAL RF PROPERTIES • Well-controlled dielectric constant range 2.55–23 • Ultra-low loss even at mmWave frequencies • Stable performance even up to 220 GHz SPEED UP YOUR CONCEPT VALIDATION WITH • Avient Design services • Filaments for 3D printing FROM PROTOTYPING TO MASS PRODUCTION • Injection molding process enables flexible product designs • Scalable production • Customized sheets in high volumes • Consistent quality in mass production • Excellent total cost performance compared to traditional materials PREPERM™ IS A SUSTAINABLE CHOICE Products’ life-cycle and environmental footprint are important factors for designers.

They provide similar performance characteristics to conventional grades formulated with PTFE, helping to reduce friction, noise, vibration, and heat build-up as well as improve product durability in applications that involve mating surfaces or extreme wear. KEY CHARACTERISTICS • Excellent wear resistance • Reduced friction, heat build-up, noise & vibration • Improved processability & surface finish on parts • Lower power requirements & low maintenance • Reduced tool contamination and corrosion • Reduction in lubricant migration time • Design flexibility • Reduced weight • Chemically resistant MARKETS & APPLICATIONS Ideal for applications in many industries including transportation, industrial, household, electrical and electronics including: • Transportation – Fuel flap axis, interior door handle axis, gears, seat mechanics, sun-roof sliding mechanisms, side mirror parts • Industrial – Conveyor belt gears, pulleys • Household – Window/door runners, furniture parts, hinges • Electrical and electronics – Electrical plug safety parts, printers, barcode scanners PRODUCT BULLETIN EUROPE GRADES ASIA GRADES Material Name Base Resin Reinforcing Filler Lubricating Filler LubriOne LB6000-5024 RS HI natural PA6 GF10 UHMWPE Lubrione LB6000-5021 RS S1 GF30 UHMWPE Lubrione LB6000-5021 RS X2 GF30 UHMWPE LubriOne LB6000-5019 X1 black GF50 UHMWPE LubriOne LB6700-5001 RS AF black PA6/PA66 GF50 UHMWPE LubriOne NN-000/01M black SO PA66 Unfilled MoS2 LubriOne REC LB6600-5030 RS grey GF33 Graphite LubriOne LB3300-5010 RS natural PBT GF20 UHMWPE LubriOne LB3300-5005 RS natural MI20 UHMWPE LubriOne REC LB3220-5001 RS C natural X1 PC GF10 UHMWPE LubriOne LB8900-5010 GP grey PKE Unfilled Graphite LubriOne LB8900-5006 RS PE natural GF20 UHMWPE LubriOne LB8900-5004 RS PE natural GF30 UHMWPE LubriOne LB4200-5022 black POM Unfilled MoS2 LubriOne LB4200-5023 natural Unfilled UHMWPE LubriOne LB9200-5012 RS PE natural PPS GF30 UHMWPE Material Name Base Resin Reinforcing Filler Lubricating Filler LubriOne LB6600-8056 LB BK001 PA66 Unfilled LDPE LubriOne LB6600-8054 RS BK001 CF30 LDPE LubriOne LB6600-8052 RS BK001 GF30 LDPE LubriOne LB4200-8032 RS NC001 POM GF30 LDPE LubriOne LB4200-8030 AR NC001 AF10 LDPE LubriOne LB4200-8026 LB BK001 Unfilled LDPE+HDPE LubriOne LB3200-8022 LB BK001 PC Unfilled UHMWHDPE LubriOne LB3200-8021 RS BK001 GF30 UHMWHDPE LubriOne LB7600-8008 RS BK001 PPO GF20 UHMWHDPE Copyright © 2024, Avient Corporation.

LOW HAZE The new 4020G grade of ColorMatrix Amosorb offers similar oxygen scavenging performance as previous solutions with the added benefit of up to 50% lower haze, resulting in improved clarity and clearer looking bottles. PRODUCT BULLETIN KEY BENEFITS • Non-nylon based • Up to 50% lower haze • Lower impact on PET recycle stream • 40% increased shelf-life at maximum allowable use limit • No induction period, provides immediate protection • Can be used with any PET & most rPET grades • Simple to use with existing mono- layer equipment • Suitable for use on multi-layer machines MARKET & APPLICATIONS • PET and rPET rigid packaging for food and beverage REGULATORY ColorMatrix Amosorb 4020G meets direct food contact regulatory requirements in major markets.

Consider these solutions: • Anti-stat to prevent dust build up • UV blockers or stabilizers to protect package contents • Anti-microbials for limiting microbe development • Scratch and mar technology to preserve surface finishes • Impact modifiers that increase flexibility and durability Reduce Risk with Regulatory Support We know that regulatory compliance requirements are constantly changing. We’ll provide step-by-step guidance, and visualization through in-house sampling with various processing techniques: • Injection stretch blow molding (ISBM) • Extrusion blow molding (EBM) – up to four layers • Injection molding Our polymer science proficiency, colorants and additives capability, and in-house color design service make us a powerful collaborator during the complete blow molding process.

These colorants are based in polysulfone resins which can withstand up to 1,000 autoclave cycles and high heat sterilization to 150°C, as well as hold up to the effects of harsh cleaning agents.

They can also be part of the chemical foaming process, achieving a material expansion of up to 50%. Up to 30% weight reduction can be achieved with Hydrocerol Chemical Foaming Agents in these applications.